Freeway Medical - Design and Manufacturer of hospital trolleys, medical trolleys, medical furniture, medical equipment, custom design hospital equipment

01635 866717

Your Quote

Your quote is currently empty

Featured Product

Recently Viewed




Width: 800mm

Height: 970mm

Depth: 600mm

Special features:

Freeway Chart Workstation 800(w) x 600(d) x 970(h)mm. Coated in white nylon modified polyester, complete with:

  • 5, 100mm castors (2 braked):
  • Low centre of gravity base with tubular centre frame.
  • 1 chart board 600 x 600(h)mm, the chart board would be manufactured from White P.E.T.G complete with integral pen holder at the base of the board.
  • 4 x Removable magnets would hold the chart in place.
  • 1 pull-out shelf to accommodate a key board with integral mouse tray which can slide to either the left or right hand side. Coated in grey nylon modified polyester.
  • 2 x Medium Drawer drawer mounted below the Pull – out shelf. Coated in white nylon modified polyester. Complete with Stainless Steel bar handle.
  • Facilities on the rear of the unit to accommodate the CPU of an electronic charting system making the PC unit secure, protected from any possible contamination and easy to clean as it has flat sides away from the electronics.
  • Facilities for different CPU sizes and additional UPS supplies can be made subject to consultation with our design team
  • The CPU unit would lock shut with a 4 digit numeric keypad lock.
  • - 4 gang earth bonded electrical socket, mounted in the rear of the chart trolley. As standard this unit is set up for floor mounted power if ceiling mounted power is required please note there is a small charge for the additional connections and work.
  • Secondary Earth bonding Lead – Runs from the earth bonded power unit to the furthest point internally on the enclosed monitor pole meaning if the length of uninspected cable were to the fray in any way the power would be redirected to earth.
  • Movable arm to accommodate a computer monitor. This can be mounted in either the left or right hand rear corner.

    The arm is prewired and the cables are concealed to allow easy cleaning. The unit comes as standard with a monitor power cable ( 13amp to C14) and SVGA connections allowing the arm to secured into place on either side with minimal effort and simply plug into the user’s PC equipment at either end.

    The monitor its self is secured and adjusted by a clinical grade monitor mount capable of smooth rotation, pivoting and height adjustment to suit the user’s needs in addition to the monitor poles movement.

  • Easy Breakaway Data Connections 2No. RJ45 sockets secured into the under side of the unit ready for floor mounted connections unless otherwise stated NO CHARGE FOR EXTENSION TO CEILING MOUNT POSITION , supplied with prewired RJ45 IP sockets and Cat 5e cables for connection to the CPU unit.
  • Custom designed Power and data leads – designed to your own specification to suit your individual needs acts like a telephone lead and retracts when force is not being applied – easy to clean and prevents trailing leads over the floor.
Tags / Also Known As:
FW840-EPR,, Charting Trolley,End of bed Trolley,Vari-cart workstation,Vari-cart chart workstation,Paper chart trolley,Chart workstation,Critical care charting trolley,Compact charting trolley,Neonatal charting trolley,Electronic charting trolleys,Computer chart workstations,Chart workstation with support for Patient Vue,Bespoke chart workstation trolleys,Custom chart workstation trolleys,Lectern
Add to your quotation:

You have 0 x FW840-EPR in your quote.

Continue Shopping
Proceed to Quote Form
Other products in the range:
FW830-EPR FW3100IT FW7000 JRH 1