Freeway Custom Dispensing Cart 900*(w) x 499(d) x 980(h)mm
in white nylon modified polyester, plus 1 special colour for the internal storage
areas ,( * work top width only – excludes handles) complete with:
- 4 x 100mm Easy
clean castors (2 x braked)
- LOCKING Secure Twin Lids that
hinge on the both sides of the cart that secure all colour coded lower contents
to form secure work surfaces when open-
each approximately 350mm x 500mm in size with stainless steel preparation
surfaces on the inside.
- On the Top Surface of the unit there is:-
- 5 x Removable 130mm wide Dispensing
Holders – these are top
mounted and sit front to back in the frame providing 225mm depth and 490mm
length of storage, this area can be sub divided with adjustable divider sets
that are included free of charge below, each divider has space for a clear
- Each of the 5
units is individually coloured to provide a simple and easy to configure ( self
managed) storage system that is easily identifiable.
- 5 x Sliding 120mm wide Dispensing holder – these units sit
on top of the 130mm dispenser units, and take up 50% of the 490mm length, and
slide easily on top rails, allowing the user greater space per section and easy
access to the low sections.
- Taller drugs
bottles can then still sit on the lower section without affecting the upper.
- The upper
section are also sub divided using the same divider sets
- The Sliding
sections can also be lifted out easily for total access and deep cleaning.
- BOTH THE UPPER
AND LOWER COLOURED STORAGE SECTIONS CAN BE REMOVED FOR DEEP CLEANING OR
RESTOCKING IN SECONDS
- 2 x lengths ANODISED ALUMINIUM UNIVERSAL MEDICAL RAIL mounted on the left and right hand side of the trolley which can accept a wide range of hook over accessories and existing equipment fitted with universal rail clamps. Spaced 25.4mm from the chassis.
Handle – This can be added to any frame to provide a handle on the LEFT hand side.
Handle – This can be added to any frame to provide a handle on the RIGHT hand side.
Keyless Locking Facility to provide secure locking
facilities to ALL 5 x Dispensing area.
lock is completely keyless and is programmable using a very simple and quick
process to allow the user to change the everyday codes, when required.
lock is also “pre-programmed” with a Management code, allowing senior staff
access even if the user code is forgotten or accidently re-programmed, so
access can always be gained.
life cycles are every 15,000 operations, and then the low battery warning light
will operate for a further 250 operations to let you know the battery requires
the battery fails completely, there is a external safety feature that allows
you to open the lock manually using a key override.
Freeway Medical can provide a Lock programming service so that the lockers arrive on site with the correct
codes ready to use, simply please inform
us at the time of order of the following:-
4 digit - USER CODE: -
( Example 1 2 3 4 )
8 digit – WARD MANAGER CODE: - ( Example 22 33 44 55 )
8 digit – MASTER CODE: -
( Example 99 88 77 66 )
- 5 X SETS Adjustable Drawer dividers to suit
the FW6000 Internal trays. These
would divide the Top and bottom spaces into Multiple adjustable sections.
Coated in WHITE nylon modified polyester.
- Allows for each individual colored section
to be supplied with 7 of their own divider sets per section.
- Secure Laptop Storage Drawer - Metal Drawer 650(w) x 470(d) x 109(h)mm. Coated in white
nylon modified polyester. Complete with:-
- 109mm deep x 650mm wide internal storage
area for Laptop / tablet computer / other secure storage.
- 1 x Removable stainless steel bar handle.
- 1 x Removable drawer front, this will be
supplied in a colour of your choice at no extra cost.
- 400mm Ball Race runner – complete kit, with 2 units for either side of the
drawer, both inner and outer extensions.
- Additional Storage Shelf - Above the
drawer, the system also includes a useful and easy to clean oddment shelf
between the top of the drawer and the underside of the Colour coded storage
tray. Ideal for dispensing cups etc
- Metal Drawer 650(w) x 470(d) x 220(h)mm.
Coated in white nylon modified polyester. Complete with
- 1, Removable stainless steel
- 1 Removable drawer
front, this will be supplied in a colour of your choice at no extra cost.