Q: Do you need to identify your ward equipment or ward areas quickly?
A: Why not order any colour at no extra charge.....
DOUBLE sided 2100(w) x 1050(d) x 1850(h)mm.
Coated in white nylon modified polyester, complete with:-
- 4, 125mm castors
- 4 buffers, one mounted above each castor. – these are optional
depending upon the overall measurements and space constraints – please advise
at the time of order.
- 1 Back board in white Melamine, to finish no higher than 1850mm from the top to the
finished floor level.
BOTH SIDES TO CONTAIN:-
- Divider Work Shelf 2100(w) x 500(d)mm. Complete with support brackets. The work surface
would be constructed from white TRESPA with high impact plastic safety edging.
cupboard unit 650(w) x475(d) x
680(h)mm. Coated in white nylon modified polyester, complete with:
at the left hand side of the room divider below the work surface.
- Divider Drawer and sharps safe combination unit 650(w) x 475(d) x 680(h)mm. Coated in RED & white
nylon modified polyester. Complete with
- 1 x drawers
(Lockable) 590(w) x 100(d) x 150(h)mm.
Coated in RED Ral 3020 nylon modified polyester. Mounted at the top of the unit.
- This top
drawer would lock by a “Key less” 4 digit electronic code lock, the code can be
set by the user, but overridden by the master code pre-programmed into each
- Under the
Drawer there would be an open space for the Sharps bin to conveniently sit.
in the centre of the room divider side of the room divider of the room divider
below the work surface
- Divider Drawer unit 650(w) x 475(d) x 680(h)mm. Coated in white nylon
modified polyester. Complete with:-
- 1 x Top
drawer (590(w) x 150(h)mm. Coated in WHITE in nylon
modified. At the top of the unit
- 2 x drawers
590(w) x 120(d)* medium drawers. Coated in WHITE in nylon
modified. Mounted Underneath the top drawer.
- ( * denotes approximate height, actually height will
be calculated at time of constriction by engineers to equally split each of the
2 central drawers after the critical heights of the top and bottom drawers have
been accounted for.)
drawers 590(w) x 185mm deep bottom drawer. Coated in WHITE
in nylon modified. Mounted at the bottom of the unit
- Rail mounted Panel to suit
a Dani centre Hygiene panel – this is coated in white Nylon modified Polyester and designed to accommodate a client supplied
Daniels medical Hygiene panel.
- 1 x Single Gel holder – HOOK OVER
FITMENT, coated in
white nylon modified polyester. The hook over fitment allows the Gel dispenser
to be repositioned along the length of the room divider as per the users
- 1 x double waste bag holder – HOOK
coated in white nylon modified polyester. The hook over fitment allows the
double waste bag dispenser to be repositioned along the length of the room
divider as per the users.
- The design
of this is almost identical to the apron roll dispenser but reduced in size to
suit sample bag roll provided.
- Length of
medical rail mounted to the back board to accommodate the range of hook over accessories.
- Freeway medical
Adjustable Chart Holder to accommodate the
chart size 650mm wide x 600mm high. Complete with 2 chart clips and pen holder
facility. This would be RAIL MOUNTED to the Medical Rail on the back
board allowing the unit to be repositioned.
Tags / Also Known As:
FW7000 - 9279Q Room Divider,,Bed dividers, Room dividers, Screens, Bedside Screens, Patient dividers, Space Dividers, Room storage, Ward Storage, Bedside storage, Room screens, Movable screens, Moveable dividers, Folding screens, Bedside storage, X ray room dividers, Lead lined room dividers, X ray screens, Quick access airways dividers, Resus room dividers, Airways dividers, Airways room dividers, Airways boards, Bedside drawers, Bedside cupboards, Bedside storage, A&E resus Bay, A&E Airways bay
Add to your quotation:
Other products in the range: