Freeway Medical - Design and Manufacturer of hospital trolleys, medical trolleys, medical furniture, medical equipment, custom design hospital equipment

01635 866717

Your Quote

Your quote is currently empty

Featured Product

Recently Viewed




Width: 1450mm

Height: 1020mm

Depth: 550mm


Freeway Vari-Cart IT workstation 1450(w) x 550(d) x 1020(h) mm. coated in white nylon modified polyester, complete with:-

  • 4, 75mm castors (2 with brakes)
  • Integral trolley space – under the work surface on the BOTH sides of the unit an open space to take the enclosed vari-carts that are 920mm in height.
  • Top work surface, manufactured from white Trespa.
  • Easy Clean side panels - 3 enclosed sides, (Left, right and Rear )coated in white nylon modified polyester.
  • Lockable facilities to accommodate a variety of sizes of CPU’s This would be mounted on the right hand side of the workstation, below the work surface. It would have a lockable door which would lock on a digital numerical key pad lock.
  • Easy Breakaway Data Connections 2No. RJ45 sockets secured into the bottom rear right hand side of the Work Station of the lockable CPU unit, supplied with prewired RJ45 extensions and Cat 5e cables for connection to the CPU unit.
  • Special IP rated quick release RJ45 couplers will be provided ( 2 per unit) as free issue to your own data technicians to fit up to the cables running from the unit to the wall / ceiling data connections.
  • Custom designed earth bonded unit to allow emergency break away from wall power supply via a 13amp plug, 4.5 meters of LSF cable feeding into a C14 Plug, on the rear right hand end of the workstation there would be a C13 socket unit fixed to the trolley allowing a speedy disconnection to power if required. 
  • 4 gang earth bonded electrical socket to power the CPU and other systems within the lockable facility.
  • Primary Earth bonded wire from the 4 gang adapter secured into the frame. Safe guards users against electrical faults in computer equipment or accidents caused by frayed wires etc. 
  • Daniels Orange plastic  Style Sharp safe holder – to suit Daniels sharp safe containers Mounted on the front It cupboard door.
  • Accessory Panel to suit the FW3200IT computer Workstations. Mounted on the left hand side of the Workstations. Coated in white nylon modified polyester
  • Three adjustable glove box dispensers, these would be mounted on the panel near the top.
  • Apron Roll holder mounted below the three glove box holders. Coated in white nylon modified polyester.
  • Gel dispenser holder mounted on the end of the Apron dispenser facing the front of the workstation. The gel dispenser would accommodate a gel bottle 70mm square. – this location will minimize potential accidental damage.


  • 2 x Freeway Vari - Cart 512(w) x 480(d) x 920(h)mm. Coated in white nylon modified polyester. Complete with:
  • 4, 75mm castors (2 braked)
  • 4 clear trays manufactured from SAN.
  • 1 deep basket, coated in white nylon modified polyester.
  • (can be supplied with different tray configuration at no extra cost)
  • Top work surface, complete with 3 raised edges and easy clean corners. – Manufactured from Stainless Steel
  • Drawer runners that prevent the accidental removal of the clear trays and baskets.


Special features:
Tags / Also Known As:
FW3200IT,, Charting Trolley,End of bed Trolley,Vari-cart workstation,Vari-cart chart workstation,Paper chart trolley,Chart workstation,Critical care charting trolley,Compact charting trolley,Neonatal charting trolley,Electronic charting trolleys,Computer chart workstations,Chart workstation with support for Patient Vue,Bespoke chart workstation trolleys,Custom chart workstation trolleys,Lectern
Add to your quotation:

You have 0 x FW3200IT in your quote.

Continue Shopping
Proceed to Quote Form
Other products in the range:
FW830-EPR FW840-EPR FW7000 JRH 1