Freeway Medical - Design and Manufacturer of hospital trolleys, medical trolleys, medical furniture, medical equipment, custom design hospital equipment

01635 866717

Your Quote

Your quote is currently empty

Featured Product

Recently Viewed

FW2400 Resuscitation Trolley

Specification

Dimensions:

Width: 800mm

Height: 1000mm

Depth: 550mm

Description:
The FW2400 is an example of a high specification resuscitation trolley. If has a number of additional accessoriesone of which is an audible alarm which sounds when any of the drawers are opened prior to diabling the alarm.
Special features:
  • Frame (including handle)
  • Top work surface 720(w) x 550(d)mm. (Complete with cut out for cylinder holder)
  • 4, 100mm castors (2 braked)
  • 4 buffers (one on each wheel)
  • Cabinet to fit into the frame    
  •  3 x Drawer unit 500(w) x 360(d) x 125(h)mm. White nylon coated. The drawer can take a plastic padlock.
  • 1 x Deep Basket drawer 500(w) x 360(d) x 370(h)mm. White nylon coated. This would take two drugs boxes 380(w) x 135(d) x 350(h)mm. The drawer can take a plastic padlock.
  •  Rail Assembly with drip pole, complete with
  • two medical rails which are height adjustable. The Top Strip of medical rail would extend to the full width of the trolley on the right hand side.
  • 1 stainless steel drip pole, with two IV hooks.
  • Stainless Steel drip pole, with two IV hooks.
  •  Oxygen cylinder holder E -size, white nylon coated. This would be mounted on the left hand rear of the emergency cart.
  •  Oxygen cylinder holder E -size, white nylon coated. This would be mounted on the right hand rear of the emergency cart.
  •  Medical Rail Fitted to the rear and the left hand side of the Emergency Trolley.
  • 1 strip fitted to the back
  • 2 strips fitted to the left hand side
  •  Sharps Safe Bracket, complete with universal rail clamp. This would be mounted on the rail assembly above the work surface.
  • Amby basket 215(w) x 160(d) x 200(h)mm, complete with universal rail clamp.  This would be mounted on the rail assembly above the work surface.
  •  4 Gang Electrical Socket, Complete with earth bonding strip fitted to the trolley. The electrical socket would have a cover.
  •  Pads & Paper Holder 400(w) x 180(d) x 150(h)mm. White nylon coated. This would sit on the top work surface on the right hand side. It would have an adjustable divider which would fit into three sections spaced 50mm, 100mm and 150mm from the left hand side of the Pads & Paper holder
  •  Holder for Canulars 75(w) x 75(d) x 550(h)mm, white nylon coated. This would be mounted on the rear LSU protection screen.
  •   Yankaeur Sucker holder to hook over the medical rail above the work surface.
  •  LSU front and rear protection screens, white nylon coated with lettering LSU detailed on the front screen. These would be large enough to provide protection for the LSU. The rear LSU screen would have a 50mm square whole in it to allow access for a plug.
  •  LSU Holder 345(w) x 175(d) x 340(h)m. White nylon coated, complete with Velcro strap to secure through the handle of the LSU.
  •  Alarm to sound when any of the  drawers are opened. The would be controlled by a key pad entry system.
Tags / Also Known As:
FW2400 Resuscitation Trolley,,Resus trolley,Resuscitation trolley,Emergency trolley,Crash cart,Crash Trolley,Airways trolley,Cardiac trolley,Intubation Trolley,Emergency intubation trolley,Difficult intubation trolley,Difficult airways trolley,Bespoke emergency trolleys,Custom emergency trolleys
Add to your quotation:

You have 0 x FW2400 in your quote.

Continue Shopping
Proceed to Quote Form
Other products in the range:
No Image No Image No Image No Image No Image No Image